2.4GHz 4Channel Remote Wireless Receiver + 2PCS 9LED IR Day and
[CA810-CA705]

General Specification:

Transmission Frequency: ISM 2.414 ~ 2.468 GHz

Transmission Power: 10mW/CE; 2mW/FCC

Unobstructed Effective Range: 100m (Min.)

Modulation Mode: FM

Operating Temperature: -10 ~ +50(Degree C) / +14 ~ +122(Degree F)

Storage Temperature: -20 ~ +60(Degree C) / -4 ~ +140(Degree F)

Operating Humidity: ≤85%RH

Camera Specification:

TV System: PAL/NTSC

Validity Pixel: PAL: 628(H) x 582(V)

NTSC: 510(H) x 492(V)

Image Device: Vimicro 0702 Vision CMOS

Horizontal Definition: 380 TV Lines

Angular Field of View: 45˚ (f=6mm)

Minimum Illumination: 0 Lux

Night Vision Range: 8m

Band Width: 20M

Synchronization System: Internal

Scanning Frequency (H): PAL: 15.625KHz ; NTSC: 15.734KHz

Scanning Frequency (V): PAL: 50Hz ; NTSC: 60Hz

Backlight Compensation: Auto

Electronic Shutter: 1/50(1/60) ~ 1/100,000 Sec

White Balance: Auto

S/N Ratio: >48db

Gamma Correction: >0.45

Operation Temperature: -10 ~ +50 / +14 ~ +122˚C / ˚F

Transmission Frequency: ISM 2,400 ~ 2,483MHz

Power Supply: DC +12V 

Receiver Specification:

Receiving Frequency: ISM 2,400 ~ 2,483MHz

intermediate Frequency: 480MHz

Frequency Stabilization: ±100KHz

Demodulation Mode: FM

Antenna: 50 ohm SMA

Receiving Sensitivity: ≤-85dBm

Video Output: 1Vp-p @ 75Ω, S/N>38dM

Audio Output: 3Vp-p @ 600Ω

Operation Temperature: -10 ~ +50 / +14 ~ +122˚C / ˚F

Operation Humidity: 85%RH

Power Supply: DC +12V 

Features:

1. (2.4GHz) Wireless cmos Camera.

2. Infrared night vision CCD Wireless Camera with 8m night vision range. 

3. 4 Channel Receiver work with Cameras.

4. 380 TV Line Horizontal Definition.

5. 100m transmission distance without block.

6. PAL and NTSC system.

7. Built-in Microphone in Camera enables Audio Monitoring.

Operation:

1. Put the Camera in the place where need to monitor.

2. Insert power Adapter, the DC Output Plug of power Adapter in the power Input jack of the Receiver.

3. Use the AV Cable to connect one Channel of Audio and Video Input plugs of the TV set or Monitor.

4. Press the off/on key of the Remote Control, or press the Channel key of the Receiver and open the power Adapter of the Receiver. The Receiver will acquiesce the Channel 1 after opening.

5. Press the Channel key (marked No.1, 2, 3 and 4) of the remote control and make the Frequency of the Receiver corresponding to the transmitter Frequency of the Receiver.

6. Can see the Video and listen to the voice through the television or monitor, adjust the place of the Camera, aiming at the monitoring object then can make the valid monitor.

7. Press the ON/OFF key of the remote control, or press the Channel button on the Receiver for 3 seconds to turn off the power of the Receiver.

Package Contents:
1 x 2.4GHz 4-Channel Remote Wireless AV Receiver

1 x Antenna for Receiver

2 x 2.4GHz Security CCTV Wireless CMOS Color AV Camera

1 x DC12V Adapter for Receiver

2 x DC12V Adapter for Camera

1 x Remote Controller