Power supplied with cable externally (Need 12V power supply, ANT-003A has 12V power supply cable)
Good reception and high quality, can match with DVB-2009HD MPEG4 TV receiver.
1. Digital active antenna UHF/ VHF TV antenna with RF amplifier
2.Build in 25DB digital signal booster
3.External 12V power supply
4.Receiving Frequency Range: VHF-H 170 — 230MHZ, UHF 470 — 860MHZ
5.Supply voltage: DC12V—13.8V car
6.Performance assurance voltage: DC8.5V—15V
7.Inside operation voltage: DC5V ± 10%
8.Curren consumption: 35 MA MAX
9.Performation assurance temp.range: -20 — +70 degree Celsius
10.Operation assurance temp. range: -30 — +80 degree Celsius
11.Storage assurance temp. range: -40 — +85 degree Celsius
12. V.S.W.R: less than 2
14.Coaxial cable: L=5.0M
15.DC power cord: AWG24 L=5M
16.Connector: F type +12V –GND
17.** How to use
1).Detach tape and attach antenna unit. Advice for best perforamnce: place antenna as high as possible, one antenna in the front left side of the car and one antenna in the back right of the car to creat best diversity environment.
2).Coaxial cable connect to receiver antenna F-type connector.
3).DC power cord connect to car battery + and – , only for ANT-003.
18.**Caution: Tint film will cause poor reception. Make sure the antennas are mounted on the clear window. Please check your DVB-T tuner, if it supports active 5V for antenna, we advice to use ANT-003, otherwise, in order to get good reception, you’d better to use ANT-003A, it has 12V power lead for active antenna.
19.Attention: We have two similar antennas, one is: ANT-003A, external 12V power supply; another one is: ANT-003, internal 5V power supply.
ANT-003A Digital TV antenna x 1(100% Brand New High Quality)